Tall Garage Cabinet: Which Width Should You Build? 24 vs 48 vs 60 Inches, Cost and Sheets Compared

The short answer

Build the widest cabinet your wall allows — but know where the cost jumps. The Northpine Tall Garage Cabinet comes in three widths in a single plan: 24, 48, and 60 inches, all 24 inches deep and 96 inches tall. Material cost runs $268 for the 24-inch version, $347 for 48 inches, and $569 for 60 inches. The 48-inch width is the sweet spot for most garages: twice the shelf width of the 24-inch for $79 more, while the 60-inch version costs $222 more than the 48-inch, because it takes seven sheets of 3/4-inch plywood instead of four — and its back comes in two panels.

Why the width decision comes first

At 96 inches tall — a full eight feet — the cabinet uses the whole height of a standard garage wall, so the height is already decided for you. The width is the real choice, and it is a wall decision before it is a build decision. Measure the wall first: the cabinet is 24 inches deep, and its overlay doors swing out on concealed hinges, so leave clear floor space in front of it. Then count what has to live inside. Paint cans and tool bins stack on shelves; long-handled tools and a vacuum need a tall, uninterrupted column. A 24-inch cabinet holds one column of that; a 48-inch cabinet holds two side by side; a 60-inch cabinet is a storage wall in a single build.

That is why the plan includes all three widths instead of making you buy three plans. Same construction, same 19 pages, same shelf system — the only thing that changes is the cut list and the sheet layout. You decide the width when you cut, not when you buy.

The three widths, side by side

  • 24 in wide (24 × 24 × 96 in) — one column of storage for a narrow wall, or the gap beside the workbench. 3 sheets of 3/4-in plywood + 1 sheet of 1/4-in. Material cost: $268.
  • 48 in wide (48 × 24 × 96 in) — the all-rounder: twice the shelf space of the 24-inch for $79 more. 4 sheets of 3/4-in + 1 of 1/4-in. Material cost: $347.
  • 60 in wide (60 × 24 × 96 in) — a full storage wall in one cabinet. 7 sheets of 3/4-in + 2 of 1/4-in. Material cost: $569.

One detail worth knowing before you buy plywood: the 60-inch back comes in two panels. A single back panel for a 60-inch-wide, 96-inch-tall cabinet cannot come out of one 4×8 sheet, and the plan says so instead of leaving you to discover it at the saw.

What it costs to build each width

The material costs are computed by the plan engine from the printed layouts, so they follow the sheet counts exactly. The jump from 24 to 48 inches is gentle — one extra sheet of 3/4-inch plywood, $79 more. The jump from 48 to 60 inches is the steep one: three extra sheets of 3/4-inch plywood and a second 1/4-inch sheet, $222 more in materials. If your wall is longer than 60 inches, two 48-inch cabinets side by side give you 96 inches of storage for $694 in materials — and you can build the second one later, when the first one is already full. Plywood prices move by store and region, so treat these figures as the plan's computed estimates, not a quote.

What's inside the cabinet

  • 3/4-inch plywood carcase on a recessed toe-kick base, with a 1/4-inch back
  • Overlay doors on concealed hinges
  • 1 fixed shelf + 4 adjustable shelves on 5 mm pins — move the shelves when the contents change

The shelves are the point of a cabinet this tall: five shelf levels across the full 96-inch height, so bins and paint cans stack vertically instead of spreading across the floor.

What's in the plan

  • 19-page plan (US Letter), imperial and metric throughout
  • Front, side, and top elevations plus a full exploded view, dimensioned in inches and millimetres
  • Separate cut list and sheet layout for each width — 24, 48, and 60 inches
  • DXF and SVG cutting files, grouped by real material thickness (3/4 in vs 18 mm)
  • Exact hardware list, screw sizes included

Every dimension comes from a single parametric model and is machine-checked before release, so the cut list, sheet layouts, drawings, and CNC files all agree with each other.

Tools you need: a circular saw with a straightedge guide (or a table saw / track saw), a drill/driver and a pocket-hole jig, a 35 mm Forstner bit for the hinge cups, a 5 mm bit for the shelf pins, clamps, a combination square, tape, and a level. No CNC is required — the CNC files are included free if you have one. Difficulty: intermediate. Build time: one weekend.

FAQ

Can I build more than one width from the same plan?
Yes. All three widths are in the one plan, each with its own cut list and sheet layout. You choose the width when you cut, not when you buy.

Why does the 60-inch version cost so much more?
Sheet count. It takes seven sheets of 3/4-inch plywood plus two sheets of 1/4-inch, against four and one for the 48-inch version — $569 in materials versus $347.

Will it fit under my ceiling?
The cabinet is 96 inches tall — eight feet — so it fits a standard eight-foot garage ceiling. Measure before you cut: the heights are fixed, so if your ceiling is lower than eight feet, this cabinet is not the right build for that wall.

Do I need a CNC?
No. Every part is a straight cut a circular saw and a straightedge handle easily. The DXF and SVG files are a free bonus, grouped by actual material thickness.

Can I move the shelves later?
Yes — four of the five shelves adjust on 5 mm pins. Only the one fixed shelf stays put.

What to build next

Get the full plan here: Tall Garage Cabinet — Woodworking Plan (24 / 48 / 60 in) ($10.99). One plan, three widths, 19 pages, DXF + SVG + PDF, imperial and metric throughout.

Once the cabinet is in place, the build that usually goes with it is the Modular Drawer Workbench ($10.99) — a bench to work at in front of the storage wall. Or hang the tools above it: the French Cleat Wall System ($7.99) — see how the 15-inch spacing works. All five workshop plans together are The Shop System ($35.99).