Crosscut and Router Sled Duo, finished build

Crosscut + Router Sled Duo — Woodworking Plan

$4.99
Skip to product information
Crosscut and Router Sled Duo, finished build

Crosscut + Router Sled Duo — Woodworking Plan

$4.99

Digital product • One-time purchase • No physical shipping

The two jigs that make a table saw and a router behave — in one plan, for the price of a coffee. A crosscut sled that calibrates dead-square with the five-cut method, error formula worked for you, and a router sled for flattening stock too wide for your planer. The router sled is drawn stored on the crosscut sled, which is where it will live in your shop too.

The numbers

  • Crosscut sled: 24 × 18 in base in ½ in plywood, tall rear fence (the working fence), low front safety fence, two hardwood miter bars ripped from a 1×4
  • Router sled: 20 × 14 in base with two rails the router bridges across
  • Plan length: 16 pages (US Letter), imperial + metric throughout
  • Calibration: the five-cut method, with the error formula worked in the plan — square is measured, not hoped for
  • Sheet goods: 1 × ½ in plywood sheet + 1 × ¾ in plywood sheet, plus a 1×4 for the miter bars
  • Estimated material cost: $145 for both sleds, including hardware, worked out from the cut list
  • Difficulty: Beginner · Build time: 1 day

What's included

  • 16-page plan (Letter, print or tablet) — imperial & metric throughout
  • Front, side & top elevations + a full exploded view, all dimensioned in inches and millimetres
  • Two complete sleds: crosscut (24 x 18) and router (20 x 14)
  • The five-cut calibration method, with the error formula worked for you
  • DXF + SVG cutting files, grouped by real material thickness
  • Exact hardware list — screw specs included, no guesswork

Tools

  • Table saw (the sleds' home) and a drill/driver
  • Calipers — the five-cut method is only as honest as its measurement
  • Combination square, clamps, a straightedge
  • A router for the second sled; any flat offcut becomes its bridge

FAQ

Is this a physical product? No — it's an instant digital download: the plan PDF plus DXF and SVG cutting files. Nothing ships.

Will the miter bars fit my saw? The bars are ripped from a 1×4 and then planed or sanded to a sliding fit in YOUR saw's slots — the plan says to measure your slots first, because slot widths vary between saws.

How square is the crosscut sled, really? As square as your five-cut measurement says it is. The plan prints the method and the error formula, so you adjust the fence by a computed amount, not by tapping and hoping.

What do the plans look like? We put real pages from the plan on this page — the cover, the cut list and the sheet layout — so you can see what you're buying before you pay.

Do I need a CNC? No. Both sleds are table-saw-and-drill builds; the CNC files are a free extra.

What if the files don't open, or something in the plan is wrong? Email us at a1809991767@gmail.com and we'll send you a new copy free. If a dimension in the plan is wrong, that's on us — tell us and we'll fix it and send you the corrected files. And if your download link ever expires, email us and we'll send you a new one.

IN SITU

Drawn flat. Lives in 3D.

Crosscut and router sleds on a table saw
THE BUILD, IN ITS ROOM
Crosscut sled on the table saw mid-setup, router sled beside it
THE BUILD, IN ITS ROOM — ANGLE 02
Crosscut + Router Sled Duo — Woodworking Plan — sheet layout page
ITS SHEET LAYOUT — FROM THE PLAN

Same dimensions in the scene, on the layout and in the book — checked against each other before this page shipped.